Difference between revisions of "Areas-of-Responsibility"
(→Sector Boundarie) |
(→Introduction) |
||
| Line 1: | Line 1: | ||
==Introduction== | ==Introduction== | ||
| − | Each working positions have their own defined Areas of responsibilities (AOR). It is a clearly defined area that is controlled by a controller at a time | + | Each working positions have their own defined Areas of responsibilities (AOR). It is a clearly defined area that is controlled by a controller at a specific time. Beyond this defined area, usually requires a handoff procedure. If the controller requests to control beyond their AOR Prior Coordination with another controller or Supervisors is required. |
| + | |||
==Sector Boundaries == | ==Sector Boundaries == | ||
Revision as of 18:10, 29 September 2020
Contents
Introduction
Each working positions have their own defined Areas of responsibilities (AOR). It is a clearly defined area that is controlled by a controller at a specific time. Beyond this defined area, usually requires a handoff procedure. If the controller requests to control beyond their AOR Prior Coordination with another controller or Supervisors is required.
Sector Boundaries
Aerodrome Controllers
CDC AOR
GMN AOR
GMM AOR
GMS AOR
AMN AOR
AMS AOR
FIS AOR
ZNC AOR
Radar Controllers
DEP AOR
DEH AOR
APP AOR
FAD AOR
TME AOR
TMS AOR
TMW AOR
TRE AOR
TRK AOR
TRS AOR
TRC AOR
TRW AOR
External links
DISCLAIMER
THE CONTENT OF THIS MEDIAWIKI RESSOURCE WEBSITE IS INTENDED FOR AVIATION SIMULATION ONLY AND MUST NOT BE USED FOR REAL AVIATION OPERATIONS.
IVAO WILL BE NOT RESPONSIBLE FOR THE MISUSE OF THESE RESOURCES OUTSIDE ITS NETWORK
